The Twin Spindle Strip Decoiler
Manufactured By M/S DAS PRECISION MACHINE TOOLS are suitable
for feeding Strip only when required.
The Twin spindle Facilitates the user to load the coil onto
the ideal spindle so that as soon as the coil is exausted
the same can be positioned & put into Production & Meanwhile
the other can be loaded for next change over. This saves
time & thus time is effectively utilised.
The changeover of feeding station is very simple & can be
achived by turining the lever provided
Features:
The motion to the loading spindles can be changed with
the help of handle ROD securing it with the locking PIN
provided.
Inner Jaws move
simultaneously with the help of rack & pinion mechanism
& can accessed by lead screw provided box spanner along
with rachet.
For change over of loading
head the twin spindle can be rotated in one direction
only after removing the locking pin. resecure the pin
after adjusting.
Monitoring unit provided,
helps to feed strip whenever required. Roller onto the
unit if comes in contact with lower proximity feeding
starts, & moment it comes in contact with upper poximity
decoiler stops, thus avoiding formation of excessive
loop.
Incase the decoiler runs
continuously for more that the preset time on timer the
decoiler stops, time can be set as per requirement
WORKING:
Grout the machine by
properly leveling.
Place the monitoring unit
at an appropriate level & in line with the machine &
decoiler head.
Remove the outer loading
plate loosing the grub provided, load the strip coil on
the inner jaw adjusting the inner jaws.
Adjust the inner loading
plate aligning the center line of strip to the machine,
now refit the outer loading plate securing the grub in
the slot on the drive shafts.
Feed the strip to the
machine through the roller onto the monitoring unit. now
the machine is ready to use.
