 |
|
|
QUALITY POLICY | |
|
BRIEF |
PRODUCTS
| ENQUIRY |
CNC COMPONENTS
| CLIENTS
|
|
|
|
 |
|
AUTOMATIC BOTTOM DISCHARGE CHIP WRINGER |
|
|
|
|
|
| |
|
|
Several machining processes such as
gear hobbing, broaching, gun drilling, turning on single
and multi spindle automats use straight cutting oil as
coolant.
The cutting oil sticks to chips and components as a
result of adhesion and surface tension. These chips are
stored in chip yards and the oil is recovered by normal
traditional way allowing oil to drain by gravity.
However oil sticking due to adhesion and surface tension
cannot be recovered and thus is wasted resulting in
major financial losses.
The Automatic Bottom Discharge Chip Wringer indigenously
developed by M/s Das Precision Machine Tools Pvt. Ltd.
can be used to recover oil form chips positively and has
following features: |
|
|
|
Features: |
| |
|
1. |
Most user friendly and
economical to use |
|
2. |
Efficiency around 95% |
|
3. |
No removal & refitting
of basket for removing of chips is required as in case
of earlier system |
|
4. |
saving time & cost of labour |
|
5. |
No Skilled Labour is
required to operate the machine |
|
6. |
Low maintenance and
running cost |
|
7. |
Totally Eliminates human error thus very
effective compared to any other conventional method |
|
8. |
The Oil separated can be collected from the
oil outlet |
|
9. |
The chips are automatically discharged at the
bottom after every cycle into trolley below it |
|
10. |
Suitable for chips of Mild Steel, Cast Iron,
Aluminum, Brass etc. |
|
|
| |
These units are
offered in two different models BD – 1 and BD – 2 with
handling capacities of 1 Kg. and 2 Kg. per minute.
|
|
Handling chips in small, medium or large machine shops
has been always a problem of the Shop Managers. As a
complete solution to chip handling, recovering oil and
disposing, M/s Das Precision Machine Tools Pvt. Ltd.
offers a complete line.
Long and curly chips from machining centers are conveyed
by Conveyor or manually loaded to Chip
Shredder where they are shredded into desired size,
this chip shredder has an online protection for
overload. After chips are shredded they are conveyed
to Automatic Bottom Discharge Wringer where these
are processed to separate oil sticking onto the chips as
a result of adhesion and surface tension and the dry
chips are discharged at bottom in the trolley.
After wringing chips these are conveyed by a Conveyor
to briquetting machine manufactured by DPMT where they
are compacted in form of cubes, which are of less than
one third volume of the normal chips, making it
convenient and economical to handle and transport. This
full line for chip handling comes with a complete
sophisticated control panel for the system well equipped
with safety provision. |
|
|
Important Feature:
|
|
Incase of
aluminum, brass or cast iron chips where they tends to
stick onto the wire mesh on the basket a brush actuated
with pneumatic cylinder is provided to scrub the basket
after every cycle facilitating in discharging the same
after every cycle. |
|
APPLICATION: |
Gear
Hobbing - Broaching - Gun Drilling - Turning - Single
And Multi Spindle Automats - And Many More
Continuous Type Automatic Bottom Discharge Chip Wringer
working on the above principal for on-line applications
are also available. The machine can be viewed
Complete Solution for Chip Handling & processing with
Chip Shredder, Conveyor & Chip Wringer also available.
Details on request.
|
|
|
|
|
|
 |
 |
 |
|
@ 2006
Das Precision Machine Tool Pvt. Ltd. |
|
